b) From the Feature Tier drop-down list, choose Standard.
Only the Standard tier is available.
c) (Optional) Check Enable Security Plus.
The Security Plus tier enables Active/Standby failover.
Step 8 (Optional) The Enable strong-encryption protocol is generally not required; for example, ASAs that use
older Satellite Server versions (pre-2.3.0) require this license, but you can check this box if you know you
need to, or if you want to track usage of this license in your account.
Step 9 Click Apply.
Step 10 Click the Save icon in the toolbar.
Step 11 Quit ASDM and relaunch it.
When you change licenses, you need to relaunch ASDM to show updated screens.
Configure the ASA
Using ASDM, you can use wizards to configure basic and advanced features. You can also manually configure
features not included in wizards.
Procedure
Step 1 Choose Wizards > Startup Wizard, and click the Modify existing configuration radio button.
Cisco Firepower 1010 Getting Started Guide
175
ASA Deployment with ASDM
Configure the ASA
To Next Page
Loading...
Need help?
General