2.4 Other features
x Auto Internet detection (DHCP, PPPoE and physical link)
x DDNS and Internet MAC address clone
x NTP (Network Time Protocol) that will synchronize with a Real-Time Server
x Static and Dynamic Routing (RIP1 and 2)
x IGMP Proxy v1 and v2
x Parental Control
x Internet Access Control (QoS)
x Remote management and firmware upgrade
x Universal Plug and Play (UPnP)
x Logging for incoming and outgoing traffic
x FTP Server in USB storage feature supports Unicode and other encodings
x Router device name (NetBOIS)
x Multiple language Web UI
x LED lights can be turn on and off except Power LED
x Additional Firmware Features Requirement: EDCS-810328 and EDCS-875354
x Additional WEB UI requirement: EDCS-877228
3 Hardware Architecture
3.1 Feature List
Feature Additional Info
OS Linux v2.4
Main Processor BCM4718 (480MHZ)
Supplementary Processor N/A
S. Processor SDRAM N/A
S. Processor Flash ROM N/A
System DDR2 64 Mbytes
System Flash ROM 16 MBytes
Switch controller BCM53115 (Gigabit switch controller)
RF
2.4GHz RF/MAC is integrated into Main Processor BCM4718
5GHz RF/MAC BCM4331
PA
2.4GHz
Sige SE2528L x 2
5GHz
Sige SE2594L x 3
Packet memory 64 Kbytes
MAC addresses entries 2 Kbytes
System Power DC12V 2A or 2.5A, switching DC power adapter
EMI/EMC FCC, cUL, CE, CB, IC
Country Code / Wireless
Channels
2.4GHz
US/CA: (1~11 channels), BRCM country code: TBD
5GHz (Non-DFS)
US/CA: (UNII-1, 3 and ISM), BRCM country code: TBD
To Next Page
Loading...
Need help?
General
