Cisco Router Cisco 3600 User Guide

V.110 Support for Cisco 3600 Series Digital Modems
show modem
5
Cisco IOS Release 12.1(5)T
show modem
To display a high-level performance report for all modems or a single modem, use the show modem
EXEC command.
show modem [slot/port | group number]
Syntax Description
Defaults There are no default behaviors or values for this command.
Command Modes EXEC
Command History
Examples
Router# show modem
Codes:
* - Modem has an active call
R - Modem is being Reset
D - Download in progress
B - Modem is marked bad and cannot be used for taking calls
b - Modem is either busied out or shut-down
Avg Hold Inc calls Out calls Busied Failed No Succ
Mdm Time Succ Fail Succ Fail Out Dial Answer Pct.
* 0/0 00:21:01 132 0 0 0 0 0 0 100%
* 0/1 2d01h 1 0 0 0 0 0 0 100%
0/2 00:00:34 130 0 0 0 0 0 0 100%
* 0/3 00:21:53 126 1 0 0 0 0 0 99%
* 0/4 2d01h 1 0 0 0 0 0 0 100%
0/5 00:00:33 131 0 0 0 0 0 0 100%
* 0/6 00:21:12 131 0 0 0 0 0 0 100%
0/7 00:00:34 131 0 0 0 0 0 0 100%
b 0/8 00:00:00 0 0 0 0 0 0 0 0%
b 0/9 00:00:00 0 0 0 0 0 0 0 0%
!.
!.
!.
b 0/29 00:00:00 0 0 0 0 0 0 0 0%
Total: 00:18:25 783 1 0 0 0 0 0 99%
slot/port (Optional) Specifies the location of a slot and modem port. Remember to
include the forward slash (/) when entering this variable.
group number (Optional) Specifies a modem group to which a specified modem belongs.
The group number range is 1 to 200.
Release Modification
11.2 This command was introduced.
12.1(5)T This command was modified to show the output display indicating V.110
support on Cisco 3600 series platforms.

Cisco Router Cisco 3600 Specifications

General

Brand	Cisco
Model	Router Cisco 3600
Category	Network Router
Language	English