Cisco RV130 User Manual

Cisco RV130/RV130W Mutlifunction VPN Router 3
Cisco RV130/RV130W Features
RV130 Front Panel
Power Solid green when the device is powered on
and booted.
Flashes green when the device is booting or
upgrading the firmware.
Flashes rapidly if the device is running
corrupt firmware.
VPN
(for site-to-site
IPsec VPN
only)
Solid green when at least one VPN tunnel is
active.
Flashes green when receiving or transmitting
data through a VPN tunnel.
Amber when no enabled VPN tunnel is
active.
USB Solid green when the USB dongle is
successfully connected to an Internet
Service Provider (ISP) and an IP address has
been assigned.
Flashes green when the port is sending or
receiving data.
Amber when the USB dongle is recognized
but failed to connect to an ISP.
2

Cisco RV130 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1w, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
Dual-band	No
Ethernet LAN (RJ-45) ports	4
Supported network protocols	PPPoE, PPTP, L2TP, DNS, IGMP, RSTP, NAT, PAT, SIP, ALG
Web-based management	-
Security algorithms	AES
Product color	Black
Certification	FCC, CE, IC
Input current	2 A
Output voltage	12 V
Power source type	DC
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Weight	- g