Cisco RV134W VDSL2 Wireless-AC VPN Quick Start Guide 5
• To reboot the unit and restore the factory default configuration, press
and hold in the RESET button for more than 10 seconds. Changes you
have made to the Cisco RV134W configuration are lost.
CONSOLE— Insert the RJ-45 roll-over cable to connect the device to a
console, such as PCs.
POWER— The POWER button is used to turn the power on and off.
12VDC—Power port that connects the device to the provided 12VDC
power adapter.
Side Panel
The side panel of the Cisco RV134W has a Kensington lock slot. You can
use it to attach a cable and lock to the Cisco RV134W.
To Next Page
Loading...
Need help?
General
