Cisco RV160W User Manual

Cisco RV160W Router Quick Start Guide 5
Back Panel
WIFI — Push the button to enable or disable the WIFI.
RESET — The RESET button has two functions:
• To reboot the unit and retain the current configuration, press
and hold RESET for a least 3 but no more than 10 seconds, by
using a paper clip or a pen tip.
• To reboot the unit and restore the factory default configuration,
press and hold the RESET button for more than 10 seconds.
Changes you have made to the router are lost.
Console Port — The router console port is designed for a serial cable
connection to a terminal or a computer that is running a terminal emulation
program.
LAN — (1-4) RJ-45 device connections to link local area network devices,
such as PCs, print servers, or switches to the router.
WAN — Connecting the router to a wide area network device such as a
cable or DSL modem.
WLAN 2.4GHz
Off when the 2.4GHz wireless module is
disabled.
Flashing green when the wireless radio is
transmitting or receiving data.
Solid green when the 2.4GHz wireless module is
enabled.
WLAN 5GHz
Off when the 5GHz wireless module is disabled.
Flashing green when the wireless radio is
transmitting or receiving data.
Solid green when the 5GHz wireless module is
enabled.
USB
Off when the USB is not connected, or the USB
is inserted and not recognized.
Solid green when USB storage is recognized.
Flashing green when transmitting or receiving data.
Amber when the USB storage access has errors.

Cisco RV160W Specifications

General

Brand	Cisco
Model	RV160W
Category	Network Router
Language	English