Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Cisco, Cisco Systems, the Cisco logo, and the Cisco Systems logo are registered trademarks or
trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other
countries. All other trademarks mentioned in this document or Website are the property of their
respective owners. The use of the word partner does not imply a partnership relationship
between Cisco and any other company. (0705R)
© 2008 Cisco Systems, Inc. All rights reserved.
Printed in the USA on recycled paper containing 10% postconsumer waste.
78-18926-01
Typical Installation Scenario
The application diagram shown here is an example of a typical network
configuration.
When you connect your network devices, make sure you don’t exceed the
maximum cabling distances, which are listed in the following table:
From To Maximum Distance
Switch Switch 100 meters (328 feet)
Switch Computer 100 meters (328 feet)
Installation
Perform the steps in this section to install the hardware.
STEP 1 Connect a Category 5 Ethernet network cable to one of the
numbered ports on the Switch. Connect the other end to a
computer or other network device.
S
TEP 2 Repeat step 1 to connect additional devices.
S
TEP 3 Connect the supplied power adapter to the power port on the Switchs
back panel. Plug the other end of the adapter into an electrical outlet.
CAUTION Make sure you use the power adapter included with the
Switch. Using a different power adapter may damage the
Switch.
S
TEP 4 Power on the devices connected to the Switch. LEDs will come on for
ports connected to powered devices.
Congratulations! The installation of the 10/100/1000 Switch is complete!
Specifications
The following table lists the specifications for the SD2005 10/100/1000
Ethernet Switch.
Item Specification
Model SD2005
Standards IEEE 802.3, 802.3u, 802.3x, 802.3ab
Ports 5 RJ-45 10/100/1000 Mbps ports
Cabling Type Cat5e
LEDs System, Link/Act 1 through 5
Security Feature Security Slot
Dimensions WxHxD
5.51" x 1.31" x 5.51"
140x33.35x140 mm
Unit Weight 0.606 lbs (0.275 kg)
Power DC12V/.5A
Certification FCC Class B, CE
Operating Temperature 0ºC to 40ºC (32ºF to 104ºF)
Storage Temperature -40ºC to 70ºC (-40ºF to 158ºF)
Operating Humidity 20 to 95% Non-Condensing
Storage Humidity 5% to 90% Non-Condensing
Where to Go From Here
Resource Location
Customer Support www.cisco.com/web/products/
linksys/index.html
End User License Agreement www.cisco.com/web/products/
linksys/index.html
Regulatory Compliance and Safety
Information
www.cisco.com/web/products/
linksys/index.html
Warranty Information www.cisco.com/web/products/
linksys/index.html
Cisco Partner Central site for Small
Business
http://www.cisco.com/web/partners/
sell/smb/
To Previous Page
Loading...
Need help?
General
