Data Sheet
© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 1 of 3
Cisco SR216 16-Port 10/100 Rack-Mountable Switch
Cisco Small Business Unmanaged Switches
High-Speed 10/100 Switching for Rack-Mount or Desktop Installations
Highlights
●
Connect up to 16 devices - PCs, printers, wireless access points, servers - with
autosensing 10/100 ports
●
Designed for small businesses that require speed, reliablity, and simple management
●
Works right out of the box with no software to configure
●
Suitable for both desktop and rack-mount installation
Figure 1. Cisco SR216 16-Port 10/100 Rack-Mountable Switch
Product Overview
With its advanced switching technology, the Cisco
®
SR216 16-Port 10/100 Rack-Mountable Switch
(Figure 1) will boost your network performance with much more than just full-duplex data transfer
and dedicated bandwidth. It features nonblocking, wire-speed switching that forwards packets as
fast as your network can deliver them. Also included are Address Learning and Aging to prevent
data transfer errors and Data Flow Control to help prevent packet collisions.
You have several installation options. The compact switch fits onto your desktop, or uses the wall-
mount slots to hang it somewhere out of the way. If your network equipment is in a rack, install it
using the included rack-mount brackets.
No matter how intensive your network demands, the Cisco SR216 switch has speed, flexibility, and
reliability that you can count on.
Features
●
Ideal for integrating your 10BASE-T and 100BASE-TX network hardware
●
Sixteen 10/100 ports provide dedicated bandwidth in half- or full-duplex mode
●
Switched 10/100 ports run at up to 200 Mbps in full-duplex mode
●
Each port supports automatic medium dependent interface (MDI) and MDI crossover (MDI-
X) cable detection
●
Compatible with all major network operating systems
To Next Page
Need help?
General