Data Sheet
© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 2 of 3
Features
●
Ideal for integrating your 10BASE-T and 100BASE-TX network hardware
●
Eight 10/100 ports provide dedicated bandwidth in half- or full-duplex modes
●
Each port supports auto MDI/MDI-X cable detection
●
Compatible with all major network operating systems
●
Advanced store-and-forward packet switching optimizes data transfers
●
Auto partitioning protects PCs from downed network lines
●
Signal regeneration ensures data transfer integrity
Specifications
Table 1 contains the specifications, package contents, and minimum requirements for the Cisco
SD208 8-Port 10/100 Switch.
Table 1. Specifications for the Cisco SD208 8-Port 10/100 Switch
Specifications
Standards IEEE 802.3, IEEE 802.3u
Ports 8 RJ-45 10/100
Cabling type Category 5 Ethernet
LEDs System, Port Status 1 through 8
Environmental
Dimensions
W x H x D
5.12 x 1.18 x 5.00 in.
(130 x 30 x 127 mm)
Unit weight 15 oz. (0.43 kg)
Power DC 12V, 500 mA
Certification FCC Class B, CE
Operating temperature 32º to 122ºF (0º to 50ºC)
Storage temperature -40º to 158ºF (40º to 75ºC)
Operating humidity 20% to 95%, noncondensing
Storage humidity 5% to 90%, noncondensing
Package Contents
●
Cisco SD208 8-Port 10/100 Switch
●
Power adapter
●
Printed user guide
●
Registration card
Minimum Requirements
●
200-MHz or faster processor
●
64 MB RAM recommended
●
Ethernet adapter capable of 10 Mbps
●
Windows 95/98/Me/NT 4.0/2000/XP
Product Warranty
Limited lifetime hardware warranty with return to factory replacement and 1-year limited warranty for fans and power supplies
To Next Page
Loading...
Need help?
General
