Cisco 220 Series Smart Plus Switches Quick Start Guide 3
Front Panel
The ports, LEDs, and Reset button are located on the front panel of the
switch.
RJ-45 Ethernet Ports—The RJ-45 Ethernet ports connect network
devices, such as computers, printers, and access points, to the switch.
SFP Ports—The small form-factor pluggable (SFP) ports are connection
points for modules so that the switch can link to other switches. These
ports are also commonly referred to as mini Gigabit Interface Converter
(miniGBIC) ports. The term SFP will be used in this guide.
• The SFP ports are compatible with Cisco modules MFEBX1, MFEFX1,
MFELX1, MGBLH1, MGBLX1, MGBSX1, MGEBX1, and MGBT1.
• The SFP port is shared with one other RJ-45 port, called a combo port.
When the SFP port is active, the adjacent RJ-45 port is disabled.
• The LEDs of the corresponding RJ-45 ports flash green to respond to
the SFP port traffic.
SF220-48P 48-Port 10/100 PoE Smart Plus
Switch
48 FE Copper + 2 GE
Combo
SG220-26 26-Port Gigabit Smart Plus
Switch
24 GE Copper + 2 GE
Combo
SG220-26P 26-Port Gigabit PoE Smart Plus
Switch
24 GE Copper + 2 GE
Combo
SG220-50 50-Port Gigabit Smart Plus
Switch
48 GE Copper + 2 GE
Combo
SG220-50P 50-Port Gigabit PoE Smart Plus
Switch
48 GE Copper + 2 GE
Combo
Model Description Ports
To Next Page
Loading...
Need help?
General
