Making a Call
When you enter a phone number to make a call the soft keys become:
dial delChr clear cancel << >> *code alpha
dial Once you have entered a number or short code you can invoke
dialling by either picking up the receiver, pressing the speaker
key or pressing the dial soft key which will use the speaker
if the handset is on the phone.
delChr Allows you to delete the last number or character on the LCD
display.
clear deletes all the numbers or characters on the LCD display.
cancel Cancels the current operation and takes you back to the previous
state.
<< >> Moves cursor left or right through an entry without deleting
characters.
*code Allows you to choose to activate some special function ‘star
codes’. Full details can be found in the Cisco Small Business Pro
IP Phone SPA 50X User Guide which can be obtained from the
Cisco web site. However, you should be aware that the portal
website allows you to set up many of these functions in a more
convenient and controlled way and which can be used on other,
external phones
alpha Switches between numbers and letters on the phone keyboard.
Call Connected Options
When your call is connected the soft key arrangement changes to:
hold endCall conf xfer bxfer
hold If you wish to put a current call on hold then either press the
hold soft key or the button with the hand symbol. This keeps the
other party on the line (hearing either silence or Music on Hold if
that has been configured) but communication is suspended until
you press the Resume soft key on the handset. Note that
pressing the hand symbol button again will not resume the call.
endCall Terminates the call.
To Next Page
Loading...
Need help?
General
