Cisco SPA Series User Manual

Hosted VoIP Handset User Guide – Cisco SPA Series
9
Leave a Voicemail Message
If a destination is busy or unavailable you may be redirected to voicemail
1. When prompted, record your voicemail message then press any key
to end the recording (or hang up)
2. If a key is pressed to end the recording, you have these options:
a) Press 1 to listen to the voicemail message
b) Press 2 to save the voicemail message
c) Press 3 to re-record the voicemail message
Retrieve Voicemail Messages
Voicemail messages are available either through the desk phone or if
enabled, via email. Voicemail messages older than 2 weeks will be
removed from your phone automatically, this has no effect on the
voicemail messages in your email.
Accessing via desk phone:
1. Press the Message button
2. If prompted, enter your voicemail password
Default password: 0000#
3. You have the following options in the Voicemail menu
a) Press 1 to listen to new messages
b) Press 2 to listen to saved messages
4. After listening to the message, perform one of the following actions
a) Press 1 to listen again
b) Press 2 to save
c) Press 3 to return call
d) Press 7 to delete

Cisco SPA Series Specifications

General

Brand	Cisco
Model	SPA Series
Category	IP Phone
Language	English