Data Sheet
© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 2 of 3
Features
●
16 RJ-45 ports for 10BASE-T/100BASE-TX/1000BASE-TX connections
●
Auto negotiation of half-duplex and full-duplex mode for all ports
●
Auto MDI/MDI-X support on all ports for easy cable detection
●
Efficient MAC address learning engine supports up to 8000 MAC addresses
●
Store-and-forward forwarding scheme.
●
Standard width and mounting kit (included) for easy installation into a rack
●
Integrated 256-KB packet buffer memory
●
Supports jumbo frame of 9 KB
●
Supports IEEE 802.3x full-duplex operation
●
European Union Restriction of Hazardous Substances (RoHS) compliant
Specifications
Table 1 gives the specifications, minimum requirements, and package contents for the Cisco
SR2016 16-Port 10/100/1000 Gigabit Switch.
Table 1. Specifications for the Cisco SR2016 16-Port 10/100/1000 Gigabit Switch
Specifications
Standards IEEE 802.3, 802.3u, 802.3x, 802.3ab
Ports 16 RJ-45 10/100/1000
Cabling type Category 5 Ethernet or better
LEDs System, 1 through 16
Environmental
Dimensions
(W x H x D)
11.00 x 1.75 x 9.45 in.
279.4 x 44.5 x 240 mm
Unit weight 4.75 lb (2.155 kg)
Power 12V DC / 500mA
Certification FCC Class A, CE
Operating temperature 32º to 104ºF (0º to 40ºC)
Storage temperature -40º to 158ºF (-40º to 70ºC)
Operating humidity 20% to 95% relative humidity
Storage humidity 5% to 95% noncondensing
Minimum Requirements
●
Category 5 Ethernet network cable
●
TCI/IP installed on each computer within the network
●
Network adapter installed in each computer
●
Network operating system (e.g., Windows, Linux, Mac OS X)
Package Contents
●
Cisco SR2016 16-Port 10/100/1000 Gigabit Switch
●
AC power cord
●
User guide with online registration card
●
Set of rack-mounting brackets
Product Warranty
Limited lifetime hardware warranty with return to factory replacement and 1-year limited warranty for fans and power supplies.
To Next Page
Loading...
Need help?
General
