EasyManuals Logo
Home>Cisco>Switch>SRW2008P

Cisco SRW2008P User Manual

Cisco SRW2008P
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
Data Sheet
© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 2 of 5
Having this additional capability is not useful if it cannot be implemented. WebView provides an
intuitive, secure management interface, enabling you to better utilize the comprehensive feature
set of the Cisco SRW2008P, resulting in a better-optimized, more secure network.
Features
Eight 10/100/1000 Gigabit Ethernet ports
Two mini-GBIC slots for fiber and copper Gigabit Ethernet expansion
PoE available on any of the eight 10/100/1000 ports. The IEEE 802.3af maximum of 15.4W
per port is available on four ports simultaneously or up to 7.5W on all eight ports
16-Gbps, nonblocking, store-and-forward switching capacity
Simplified QoS management using 802.1p, Differentiated Services (DiffServ), or type of
service (ToS) traffic prioritization specifications
ACLs for granular security and QoS implementation
WebView management enables configuration and monitoring from a standard web browser
Secure remote management of the switch via Secure Shell (SSH) and Secure Sockets
Layer (SSL) encryption
802.1Q-based VLANs enable segmentation of networks for improved performance and
security
Private VLAN Edge (PVE) for simplified network isolation of guest connections or
autonomous networks
Automatic configuration of VLANs across multiple switches through Generic VLAN
Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP)
User/network port-level security via 802.1X authentication and MAC-based filtering
Increased bandwidth and added link redundancy with Link Aggregation Control Protocol
(LACP)
Enhanced rate-limiting capabilities and storm control, including multicast, broadcast, and
flood control
Port mirroring for noninvasive monitoring of switch traffic
Jumbo frame support (10 KB)
Simple Network Management Protocol (SNMP) versions 1, 2c, and 3 and Remote
Monitoring (RMON) support
Fully rack-mountable using the included rack-mounting hardware
Specifications
Table 1 contains the specifications, package contents, and minimum requirements for the Cisco
SRW2008P 8-Port Gigabit Switch.
Table 1. Specifications for the Cisco SRW2008P 8-Port Gigabit Switch: WebView/PoE
Specifications
Ports
8 RJ-45 connectors for 10BASE-T/100BASE-TX/1000BASE-T with 2 Gigabit combo
ports shared between mini-GBIC ports and ports 7 and 8
Console port
Auto medium dependent interface (MDI) and MDI crossover (MDI-X)
Auto negotiate/manual setting

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco SRW2008P and is the answer not in the manual?

Cisco SRW2008P Specifications

General IconGeneral
BrandCisco
ModelSRW2008P
CategorySwitch
LanguageEnglish

Related product manuals