Page 9 of 19
MBTelehealth - SX80 with Touchpad10 User Guide
Adjust the Volume
TIP
Connect to an MBT Site
Volume
Site to Site Calls
Connecting to an MBT Site
If you call the same sites from the same equipment you can save the contact
to the favourites list on that equipment. The next time you need to call the site,
tap Call, and then tap Favorites to locate the site rather than scroll through the
entire address book.
Tap Call.
Tap Call to connect.
Tap End to disconnect.
Tap in the search/dial eld to invoke
the keypad. (Tap the keypad icon in
the bottom left corner of the screen if
required.)
Type in the 5 digit number.
Use the
ABC/123
key to toggle
between alpha
and numeric.
Press and hold the left side of the Volume button to decrease the volume and the
right side to increase the volume.
The Home screen should always be displayed prior to connecting to a site; if not, this may mean that
a previous call was not disconnected. If you do not see the Home screen, press End to disconnect
prior to connecting to your site.
...
...
...
.
To Next Page
Loading...
Need help?
General
