Cisco IX5000 and IX5200 Installation Guide
Page 4
© 2015 Cisco Systems, Inc. All rights reserved.
Required Tools
• Metric Allen (hex) set
• 6mm T-handle hex key
• 7mm hex socket driver
• #0, #1, #2 and #3 Phillips drivers
• Snips and long nose pliers
• Extensions for Phillips bits/long handle screw drivers
• Cordless driver
• Socket wrench set (metric)
• 10mm, 13mm & 19mm wrench and adjustable wrench
• 19mm 12-point ratcheting box end wrench
• Spirit level or digital Level
• Laser level with tripod
• White gloves (included with accessory kit)
• Metric tape measure
• Box cutter