Cisco UCS B200 M3 Installation And Service Note

Cisco UCS B200 M3 Blade Server Installation and Service Note
Cisco UCS B200 M3 Blade Server 2
LEDs 2
Buttons 4
Connectors 4
Hard Drive Replacement 5
Blade Server Removal and Installation 7
Secure Digital (SD) Card Access 10
Removing a Blade Server Cover 11
Working Inside the Blade Server 14
Installing and Enabling a Trusted Platform Module 32
Server Troubleshooting 34
Server Configuration 34
Physical Specifications for the Cisco UCS B200 M3 35
Obtaining Documentation and Submitting a Service Request 35

Cisco UCS B200 M3 Specifications

General

System bus rate	8 GT/s
Processor family	Intel
Processor socket	LGA 2011 (Socket R)
Intel Xeon series	E5-2600
Motherboard chipset	Intel C600
Compatible processor series	Intel® Xeon®
Number of processors supported	2
ECC	Yes
Memory form factor	240-pin DIMM
Number of DIMM slots	24
Supported memory types	DDR3-SDRAM
Maximum internal memory	768 GB
RAID levels	0, 1
Storage drive sizes supported	2.5 \
Supported storage drive interfaces	Serial Attached SCSI (SAS), Serial ATA III
USB 2.0 ports quantity	0
On-board graphics card model	Matrox G200
Chassis type	-
Product color	Silver
Storage temperature (T-T)	-40 - 65 °C
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	5 - 93 %
Harmonized System (HS) code	84714100

Weight and Dimensions

Depth	620 mm
Width	203 mm
Height	50 mm
Weight	4360 g