EasyManuals Logo
Home>Cisco>Server>UCS B200 M4

Cisco UCS B200 M4 Servicing Guide

Cisco UCS B200 M4
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
Figure 15: Installing a VIC mLOM Adapter
Installing an Adapter Card in Addition to the VIC mLOM Adapter
All supported adapter cards have a common installation process. A list of currently supported and available
adapters for this server is in the Cisco UCS B200 M4 Blade Server Specification Sheet.
The UCS B200 M4 blade server has two adapter slots (Slots 1 [mLOM slot] and 2) that support the following
VIC cards:
VIC 1340 and VIC 1380
VIC 1240 and VIC 1280
Slot 1 is for the VIC 1340 or VIC 1240 mLOM adapter cards. Slot 2 is for the VIC 1380 and VIC 1280 cards,
and can also be used for the VIC port expander, the nVidia M6 GPU, the Intel Crypto accelerator card, and
non-I/O mezzanine cards, such as Fusion ioMemory 3 Series.
When the Cisco Nexus 2104XP Fabric Extender (FEX) module is used, the VIC 1280 and the VIC port
expander cards are ignored because there are no traces on the Cisco 2104XP to connect to any VIC or IO card
installed in Slot 2.
Note
The VIC 1340 and VIC 1380 require a Cisco UCS 6200 Series Fabric Interconnect or Cisco UCS 6300 Series
Fabric Interconnect, and they support the Cisco Nexus 2208XP, 2204XP, 2348UPQ FEX modules.
The VIC 1240 and VIC 1280 support Cisco UCS 6200 and 6100 Series Fabric Interconnects, and they support
the Cisco Nexus 2208XP, 2204XP, and 2104XP FEX modules. When a VIC 1240 or 1280 is used with a UCS
6100 Series Fabric Interconnect, the UCS B200 M4 blade server requires a maximum software release of
2.2(x) for Cisco UCS Manager.
If you are switching from one type of adapter card to another, before you physically perform the switch make
sure that you download the latest device drivers and load them into the servers operating system. For more
Servicing a Blade Server
18
Servicing a Blade Server
Installing an Adapter Card in Addition to the VIC mLOM Adapter

Other manuals for Cisco UCS B200 M4

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco UCS B200 M4 and is the answer not in the manual?

Cisco UCS B200 M4 Specifications

General IconGeneral
Tcase72.1 °C
Bus typeQPI
SteppingR2
FSB ParityNo
Scalability2S
Processor codeSR206
Processor cache20 MB
Processor cores8
Processor modelE5-2630V3
System bus rate8 GT/s
Processor seriesIntel Xeon E5-2600 v3
Processor socketLGA 2011-v3
Processor threads16
Processor codenameHaswell
Motherboard chipsetIntel C610
Processor frequency2.4 GHz
Processor cache typeSmart Cache
Processor lithography22 nm
Processor manufacturerIntel
Processor package size52.5 x 45 mm
Processor front side bus- MHz
Processor boost frequency3.2 GHz
Processor operating modes64-bit
ECC supported by processorYes
Supported instruction setsAVX
Thermal Design Power (TDP)85 W
Compatible processor seriesIntel® Xeon®
Supported processor socketsLGA 2011-v3 (Socket R)
Number of processors installed2
Maximum number of PCI Express lanes40
Memory types supported by processorDDR4-SDRAM
Memory channels supported by processorQuad
Memory clock speeds supported by processor1600, 1866 MHz
Memory bandwidth supported by processor (max)59 GB/s
Maximum internal memory supported by processor768 GB
Memory slots24x DIMM
Internal memory- GB
Memory clock speed2400 MHz
Number of DIMM slots24
Supported DIMM module capacities64GB
USB 2.0 ports quantity0
Ethernet LAN (RJ-45) ports-
Power supply- W
SafetyUL 60950-1 No. 21CFR1040 Second Edition, CAN/CSA-C22.2 No. 60950-1 Second Edition, IEC 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, AS/NZS 60950-1, GB4943 2001
Operating altitude0 - 3000 m
Non-operating altitude0 - 12000 m
Storage temperature (T-T)-40 - 65 °C
Operating temperature (T-T)10 - 35 °C
Storage relative humidity (H-H)5 - 93 %
Ethernet interface type40 Gigabit Ethernet
RAID levels0, 1
HDD interfaceSATA
Storage controllerLSI SAS3108
Total storage capacity0 GB
Compatible memory cardsSD
Maximum storage capacity3.2 TB
Storage drive sizes supported2.5 \
Supported storage drive typesHDD & SSD
Supported storage drive interfacesPCI Express, Serial ATA
PCI Express slots version3.0
Intel® Virtualization Technology (Intel® VT)VT-d, VT-x
Heat sinkUCSB-HS-EP-M4-F=, UCSB-HS-EP-M4-R=, UCSX-HSCK=
Chassis typeRack
Cooling typeActive
Product colorGray
LED indicatorsNetwork, Power
Number of fans8 fan(s)
Processor ARK ID83356
Intel Secure Key Technology version1.00
PC health monitoringLED
Sustainability certificatesNetwork Equipment Building Standards (NEBS)
Weight and Dimensions IconWeight and Dimensions
Depth620 mm
Width203 mm
Height50 mm

Related product manuals