4
Cisco Security Manager 4.3 UCS Server Bundles Quick Start Guide
78-21007-01
BIOS Setup, OS Tuning, and Security Manager Tuning (these were done by Cisco before shipment of the Bundle to you)
Step 8 Do not update the BIOS; BIOS setup was done by Cisco before shipment of the Bundle to you; see BIOS
Setup, OS Tuning, and Security Manager Tuning (these were done by Cisco before shipment of the
Bundle to you), page 4.
Step 9 Do not update the CIMC firmware.
Step 10 Use the default username and password to log on to the OS; see Usernames and Passwords, page 6.
Step 11 Activate Windows. For more information, see Windows Activation, Product Key, and EULA, page 7
Step 12 Assign a static IP address to the server; see Assigning an IP Address, page 8.
Step 13 (Optional) Change the hostname; see Changing the Hostname, page 9.
Step 14 Ensure that required ports are enabled and available for use by Security Manager and its associated
applications on your server so that the server can communicate with clients and servers running
associated applications. For detailed information, refer to “Required Services and Ports” in the
“Requirements and Dependencies” chapter of the Installation Guide for Cisco Security Manager 4.3 at
the following URL:
http://www.cisco.com/en/US/docs/security/security_management/cisco_security_manager/security_ma
nager/4.3/installation/guide/requirem.html#wp1060450.
Step 15 Use the default username and password to log on to Cisco Security Manager; see Usernames and
Passwords, page 6.
Step 16 Install the Cisco Security Manager license; see the “Updating Security Manager” section of the
“Installing and Upgrading Server Applications” chapter of the Installation Guide for Cisco Security
Manager 4.3 at the following URL:
http://www.cisco.com/en/US/docs/security/security_management/cisco_security_manager/security_ma
nager/4.3/installation/guide/inserver.html#wp1053144.
Caution Your Cisco Security Manager license is provided in paper format and is packed in your shipping carton
along with your new Bundle itself. Please take care that it is not inadvertently discarded or lost.
Step 17 Refer, as needed, to the Related Documentation section of this “Quick Start Guide.”
BIOS Setup, OS Tuning, and Security Manager Tuning (these
were done by Cisco before shipment of the Bundle to you)
Before your new Bundle was shipped to you, Cisco set up the BIOS on the server, installed and tuned
the operating system, and installed and tuned Security Manager.
BIOS settings done in the Cisco UCS server (these were done by Cisco before shipment of the Bundle to
you):
• Intel Hyper-Threading Technology enabled.
• Virtualization disabled.
• Mass Storage Controllers Configuration selected.
RAID configuration (this was done by Cisco before shipment of the Bundle to you):
• Hardware RAID controller configured, with RAID 5 set up.
OS tuning and changes done in the Cisco UCS server (these were done by Cisco before shipment of the
Bundle to you):
• Disk cache policy configured.
To Next Page
Loading...
Need help?
General
