After you install the voice gateway, you must connect the chassis to a reliable earth ground. For the chassis ground
connection procedure, see the Chassis Grounding section.
Mount Cisco VG400 Voice Gateway Chassis in Rack
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to
ensure that the system remains stable. The following guidelines are provided to ensure your safety:
• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
• When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the
heaviest component at the bottom of the rack.
• If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the
unit in the rack. Statement 1006.
Warning
Cisco VG400 Voice Gateway can be installed in 19-inch (48.26-cm) EIA racks. Use the standard brackets
shipped with the hardware for mounting the chassis in a 19-inch EIA rack.
Installing the Cisco VG400 Voice Gateway
5
Installing the Cisco VG400 Voice Gateway
Mount Cisco VG400 Voice Gateway Chassis in Rack
To Next Page
Loading...
Need help?
General
