To Next PageTo Next Page
Need help?Do you have a question about the Cisco WAP125 and is the answer not in the manual?
General| 2.4 GHz | Yes |
|---|---|
| MIMO type | Multi User MIMO |
| Modulation | 16-QAM, 64-QAM, 256-QAM, BPSK, CCK, QPSK |
| Number of users | 64 user(s) |
| Networking standards | IEEE 802.3af, IEEE 802.11ac |
| Spread spectrum method | DSSS, OFDM |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Maximum data transfer rate | 867 Mbit/s |
| Security algorithms | WPA, WPA2 |
| Number of SSID supported | 8 |
| Supported network protocols | IPv6, NTP, HTTP, HTTPS |
| USB 2.0 ports quantity | 0 |
| Ethernet LAN (RJ-45) ports | 1 |
| Output current | 1 A |
| Output voltage | 12 V |
| Power plug type | Type C |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 Hz |
| Placement | Desk |
| Certification | UL 60950-1, CAN/CSA-C22.2 No. 60950-1, IEC 60950-1, EN 60950-1, FCC 15.247, 15.407; RSS-210; EN 300.328, EN 301.893; AS/NZS 4268.2003; FCC 15.107 15.109, ICES-003, EN 301.489-1 -17 |
| Product color | White |
| Recommended usage | Indoor |
| Cable lock slot type | Kensington |
| Antenna type | Internal |
| Antenna gain level (max) | 5.63 dBi |
| Flash memory | 128 MB |
| Internal memory | 256 MB |
| Operating system installed | Linux |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 85 % |
| Country of origin | China |
| Quantity per pack | 1 pc(s) |
| Package depth | 188.976 mm |
| Package width | 168.91 mm |
| Package height | 80.01 mm |
| Package weight | 1133.98 g |
Weight and Dimensions| Width | 123.19 mm |
|---|---|
| Height | 31.75 mm |
| Weight | 303.91 g |
