EasyManuals Logo
Home>Cisco>Wireless Access Point>WAP371

Cisco WAP371 Manual

Cisco WAP371
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Reboot and Reset Factory Default Settings on
the WAP371
Objective
The factory default reset erases all configuration settings that have been modified by the
user, and restores the device to its original settings. This may be helpful if you lose the
password to a device and wish to regain access.
Note: It is advised to save a backup copy of the configuration before beginning this process.
Refer to Download/Backup Configuration on the WAP 371 for additional information.
Performing a reboot restarts the device with a saved configuration.
The objective of this article is to show you how to reset to factory default settings and how to
reboot a WAP371 Wireless Access Point.
Applicable Devices
• WAP371
Software Version
• 1.0.1.5
Reset to Factory Default
There are two ways to reset the Access Point to the factory default configuration:
• Hardware reset
• Reset with the use of the web configuration utility
Hardware Reset
Step 1. Press the Reset button for approximately ten seconds with a pin located at the back
of the device.
The Access Point reloads and is set to the default configuration settings.

Other manuals for Cisco WAP371

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco WAP371 and is the answer not in the manual?

Cisco WAP371 Specifications

General IconGeneral
ModulationOFDM
Frequency band2.4 - 5 GHz
Number of users64 user(s)
Channel bandwidth80 MHz
Channels quantity21 channels
Networking standardsIEEE 802.11ac, IEEE 802.11b, IEEE 802.11e, IEEE 802.11g, IEEE 802.11i, IEEE 802.11n, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates10, 100, 1000 Mbit/s
Quality of Service (QoS) supportYes
Flash memory128 MB
Internal memory256 MB
Operating system installedLinux
WAN connectionEthernet (RJ-45)
Ethernet LAN (RJ-45) ports1
Security algorithmsHTTPS, SSID, WPA, WPA2
Antenna featuresIntegrated antenna
Antenna direction typeOmni-directional
Antenna gain level (max)2 dBi
Power consumption (typical)17 W
InternalNo
Product colorWhite
LED indicatorsLAN, Power, WLAN
Cable lock slot typeKensington
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 85 %
Weight and Dimensions IconWeight and Dimensions
Width230 mm
Height43 mm
Weight740 g

Related product manuals