Cisco WRT610N Quick Installation Guide

Chapter 3
Advanced Configuration
23
Simultaneous Dual-N Band Wireless Router
Group Management
The groups are listed in the Group Management table.
There are two default groups, Admin and Guest; these
cannot be deleted. Click Create New Group to create a
new group.
If you click Create New Group, the Group Account screen
appears.
Each group you created on the Group Account screen
will be listed with its access rights, which you can edit or
delete. Select Edit to edit a user or Delete to delete the
user.
If you click Edit, the Group Account screen appears. Refer
to the “Group Account Screen” section.
Click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes. For more information,
click Help.
Group Account
Group Account Screen
Groups can be added, edited or deleted:
Enter a name for the group.1.
Enter a description for the group. 2.
Select3. read and write or read only access.
Click 4. Save Settings to save the new changes, or click
Cancel Changes to cancel the changes. Click Close to
close the screen.
Access Restrictions > Internet Access
The Access Restrictions > Internet Access screen allows you
to deny or allow specific kinds of Internet usage and traffic,
such as Internet access, designated services, and websites
during specific days and times.
Access Restrictions > Internet Access
Internet Access
Internet Access Policy Internet Access can be managed
by a policy. Use the settings on this screen to establish an
access policy (after Save Settings is clicked). Selecting a
policy from the drop-down menu will display that policy’s
settings. To delete a policy, select that policy’s number
and click Delete. To view all the policies, click Summary.
Deny or Allow If you select Deny, the PC on the Edit List
will be denied Internet Access by the dates and times
selected. PCs not on the list will still have Internet access. If
you select Allow, the PCs on the Edit List will have Internet
access by the dates and times selected. The PCs not on the
Edit List will be denied Internet access. If there is a conflict
with a policy, the lower numbered policy will have priority
over a higher numbered policy.
To create an Internet Access Policy:
Select a number from the 1. Internet Access Policy drop-
down menu.
Enter a Policy Name in the field. 2.
To enable this policy, select 3. Enabled.

Cisco WRT610N Specifications

General

Brand	Cisco
Model	WRT610N
Category	Wireless Router
Language	English