CHAPTER
4-1
Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide
78-6511-08
4
General Switch Administration
This chapter provides these switch administration topics:
• Initial Switch Configuration, page 4-2
• Switch Software Releases, page 4-2
• Console Port Access, page 4-3
• Telnet Access to the CLI, page 4-4
• HTTP Access to CMS, page 4-3
• SNMP Network Management Platforms, page 4-5
• Default Settings, page 4-7
The following information tends to change and therefore appear only in the release notes. Before
installing, configuring, or upgrading the switch, refer to the release notes
(http://www.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/index.htm) for the latest information
about:
• Software and hardware requirements and compatibility
• Browser and Java plug-in configurations
• Setup program
• Switch upgrades
This switch software release is based on Cisco IOS Release 12.0. It has been enhanced to support a set
of features for the Catalyst 2900 XL and Catalyst 3500 XL switches. This chapter provides procedures
for using only the commands that have been created or changed for these switches. The switch command
reference provides complete descriptions of these commands. This chapter does not provide Cisco IOS
Release 12.0 commands and information already documented in the Cisco IOS Release 12.0
documentation on Cisco.com.
To Next Page
Loading...
Need help?
General