Contents
vii
Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide
78-6511-08
Configuring the Domain Name and the DNS 6-6
Configuring the Relay Device 6-7
Obtaining Configuration Files 6-8
Example Configuration 6-9
Assigning Passwords and Privilege Levels 6-11
Setting the System Date and Time 6-12
Configuring Daylight Saving Time 6-12
Configuring the Network Time Protocol 6-13
Configuring the Switch as an NTP Client 6-13
Enabling NTP Authentication 6-13
Configuring the Switch for NTP Broadcast-Client Mode 6-13
Configuring CDP 6-13
Configuring CDP for Extended Discovery 6-14
Managing the MAC Address Tables 6-15
MAC Addresses and VLANs 6-15
Changing the Address Aging Time 6-16
Removing Dynamic Address Entries 6-16
MAC Address Notification 6-17
Adding Secure Addresses 6-18
Removing Secure Addresses 6-18
Adding Static Addresses 6-19
Removing Static Addresses 6-19
Configuring Static Addresses for EtherChannel Port Groups 6-20
Configuring CGMP 6-20
Enabling the Fast Leave Feature 6-21
Disabling the CGMP Fast Leave Feature 6-21
Changing the CGMP Router Hold-Time 6-22
Removing Multicast Groups 6-22
Configuring IGMP Filtering 6-23
Configuring IGMP Profiles 6-23
Applying IGMP Filters 6-25
Setting the Maximum Number of IGMP Groups 6-26
Configuring MVR 6-27
Using MVR in a Multicast Television Application 6-27
Configuration Guidelines and Limitations 6-29
Setting MVR Parameters 6-30
Configuring MVR 6-31
Managing the ARP Table 6-32
To Next Page
Loading...
Need help?
General