9
333
Technical data
Identifi cation markings
Various visible markings
ehicle Identification Number
ht hand front wheel arch.
re pressures are too low, this
increases
label affixed to
the centre pillar, ri
information.
- the manufacturer's name
,
- the maximum authorised wei
,
- the maximum authorised wei
,
- the maximum front axle wei
ht,
- the maximum rear axle wei
ixed to the centre pillar, on
the driver's side, contains the
lation pressures with and
without load,
- the t
re load
index and speed ratin
,
- the inflation pressure for the spare
w
ehicle Identification Number
on
the windscreen lower cross member