[SMB-20E]
― 2 ―
Use the product within the range of specifications. A load
and/or r.p.m. exceeding the specifications may result in a
damage,amalfunctionand/oraccuracydeteriorationofthe
indexunit.
Don'ttouchanymovingpartduringtheoperationofthePick
andPlaceunit.
Don't suddenly stop the input shaft revolution during the
outputsectionisworking.
① Asuddenstopoftheinputshaftbyclutchbrakeetc.willapply
theoverloadtotheunit.Thismaycauseanoverrunofthedial
plateontheunit.
② Ifatorquesaverisprovided,asuddenstopwillreleasethe
torquesaver.Thismaycauseanoverrunofthedialplateon
theunit.
③ Iftheemergencystopisnecessary,installthesafetymeasure
topreventasuddenstop,andselectthelargertorquesaver
enduringtheoverload.
Shut off the power before maintenance or inspection. A
sudden movementcausedby malfunctionor control circuit
failuremayresultinpersonalinjury.
Do not use the product in an explosive or ignitable
atmosphere.
The product must be assembled by a person with a basic
knowledgeabouttheassembly.
StartandstopthePickandPlaceunitatadwellsection.A
start or stop other than the dwell section will cause the
overload.Thismayresultinadamageoftheunit.
If a position detection cam is provided on the input shaft,
check the cam at the proper position periodically. A
misalignmentofthecamcausedbya loosesetscrew may
resultinmalfunction.
Don'tusetheproductwherewetoroilyenvironment. The
productisnotwater-proofordrip-proof.
Wheretheproductissubjecttosplashesofwateroroil,it
mustbeprotectedwithacoverorsuch.
The Pick and Place unit contains lubricant oil, which may
oozeoutthroughtheoilpackingoranotherpartduringuse.
Check the packing periodically, and install the oil pan if
necessary.
!
WARNING:
!
CAUTION: