Only fit genuine CLAAS parts. Your CLAAS approved shop
is available to supply all parts and products required for
maintaining your tractor in perfect condition.
Using components not authorised by CLAAS reduces the
machine operating capacity, as well as driving and
operating safety.
001hsn29
6.1.5 Adjustment or maintenance tasks - repairs
6.1.5.1 General rule
5749
Stay away from the tractor's hot parts. For example:
- Engine
-
Exhaust
-
Transmission
For any intervention on hot or pointed parts, wear gloves or use a rag. Wear safety goggles.
Only carry out operations well within your capabilities. A
number of simple adjustments are described in the manual
(clutch and brake free travel, etc.). Never attempt to work
on your tractor unless you have perfectly understood the
procedure and have all the basic equipment required.
Removing, disassembling, reassembling and refitting vital
parts (e.g. cab, engine, transmission or front axle) require
specific equipment. Only the use of adapted equipment
allows safe intervention while guarnateeing to achieve the
results expected.
Please refer to CLAAS approved workshops for all these
interventions. CLAAS approved workshops have specific
tools, the skills required and original spare parts. To secure
your repairs and adjustments, call a CLAAS approved
workshop.
001hsn30
6.1.5.2 Use of axle stands
5835
If the tractor is to be placed on axle stands, always work on a flat, horizontal, hard surface.
AXION 850-810 C.I.S. - 02/2012 - en
A. 11
To Next Page
Loading...
Need help?
General