Clarion AB213R User Manual

Basic Operations
Switching display
While pressing the BAND button [6], press the
DISP button [15] to select the desired display.
The display switches in the following order:
Main > Clock (CT) > Main ...
*If the display is changed by other button operation
when the clock (CT) is displayed, the clock display
returns automatically after the operation.
* The example shows the display in radio mode.
Radio Operations
Listening to the radio
1) To tune in a station, first use the BAND but-
ton [6] to select FM (FM1, FM2, FM3, FM4)
or AM (MW/LW).
The band switches as follows each time the
BAND button [6] is pressed:
FM1 > FM2 <> FM3 = FM4 - AM > FM1
(The FM1, FM2, FM3 and FM4 bands are
provided so that a maximum of 20 FM sta-
tions can be preset, but the reception fre-
quency range is the same for all four.)
Press the up or down button [1]. Tuning auto-
matically stops at a broadcasting frequency.
(Seek tuning)
2
—
Seek tuning
There are two types of seek tuning: DX seek, in
which receivable stations are tuned in in order,
and Local seek, in which only stations with good
reception are tuned in.
DX seek
1) Press the BAND button [6] to select the band.
2) Press the up or down button [1]. “DX”
appears on the display, and tuning automati-
cally stops at a broadcasting frequency.
Local seek
1) Press the BAND button [6] to select the band.
2) Press the up or down button [1] for at least 1
second. “LO” appears on the display, and
tuning automatically stops at a broadcasting
frequency.
Manual tuning
1) Press the BAND button [6] to select the band.
2) Press the BAND button [6] for at least 2
seconds.
3) “MAN” appears on the display, and manual
tuning is possible.
4) Use the up or down buttons [1] to tune in sta-
tions.
* The mode automatically switches back to the
seek tuning mode after 7 seconds.
AB213R/AB213RG Z

Clarion AB213R Specifications

General

Brand	Clarion
Model	AB213R
Category	Cassette Player
Language	English