Clarion APX480M User Manual

Clarion APX480M Power System Amplifier
Problem
Amplifier fuse keeps blowing.
Solution
Incorrect wiring or short circuit. Review Installation and check all wiring connections.
Problem
Whining or ticking noise in the audio with engine on.
Solution
Amplifier is picking up alternator noise or radiated noise. Turn down input gain;
move audio cables away from
power wires. Check power and ground connections
on amplifier; install an in-line noise filter on source unit's
power wire; check
alternator and/or voltage regulator; test for weak battery or add water to battery.
PRODUCT SPECS
Frequency Response
Signal Noise Ratio
THO
Input Sensitivity Low Level
Input Sensitivity Speaker Level
Max.
Power Output
Cant.
Power Output
2-0hm Stereo Output
Bridged
Power
Dimensions
Current Consumption @
Max
Power Output
12
20Hz - 20kHz
>95db
.05% all channels driven
250mV - 2.5V
500mV - 5V
640W (160 x4)
320W (BOW x4) @.05% THO
115W x 4 @ .5% THO
230W x 2 @ .5% THO
2
1/8" H x 8 1/4" W x 12" L
46A @ 640 Watts

Clarion APX480M Specifications

General

Brand	Clarion
Model	APX480M
Category	Amplifier
Language	English