Clarion ARX5370R User Manual

lm TROUBLESHOOTING
Power does not turn on. Replace with a fuse of the same amperage as the old fuse.
(or
no
sound
is
produced.)
|
Connections
are
improper.
|
Read
the
attached
"installation/wire
connection
guide"once
again
and
wire
prperly.
Sound quality is poor. Playback head is dirty. Use a cleaning tape, etc. to clean the head.
No sound while unit can Power ANT leadis shorted | Turn the unit off, first.
be operated. to the ground. Remove all connecting wires from the power ANT lead, and
turn the unit on, then re-connect a wire one by one to the
power ANT lead.
When sound is muted again, check the unit with a wire con-
nected last.
This unit is equipped with a number of self-diagnosis functions to protect the system. If a problem should be occur, the user
is warned throurh various error displays. Eliminate the problem using the procedures shown below.
Error display
This indicates that the pickup is out of focus during playback due to scratches on the disc, etc.
This indicates that the CD's TOC (table of contents) cannot be read, for example because the
selected disc is upside-down.
Er8 This is displayed if a cassette tape gets stuck during loading or ejecting.
—+*Remove the cause for which the cassette tape got stuck.
If a display other than one of the displays avobe appears, press the reset button.
Procedure
This indicates that a problem has occured with the CD changer's mechanism (disc cannot be
changed or ejected, etc. )
-~+The CD changer mechanism is likely damaged.
-3- ARX5370R

Clarion ARX5370R Specifications

General

Brand	Clarion
Model	ARX5370R
Category	Cassette Player
Language	English