CD
Changer Operations
CD
changer functions
When an optional CD changer is connected
through the CeNET cable, this unit controls all
CD changer functions. This unit can control a
total of 2 changers.
Press the
[CD/CDC] or [POWER] button to
select the CD changer mode to start play. If 2
CD changers are connected, press the
[CD/
CDC]
button to select the CD changer for play.
* If "NO MAG" appears in the display, insert the
magazine into the CD changer.
"DISC
CHK"
appears in the display while the player loads
(checks) the magazine.
* If "NO·
DISC"
appears in the display, eject the
magazine and insert discs into each slot. Then,
reinsert the magazine back into the CD changer.
Note:
• Some
CDs
recorded
in
CD-R/CD-RW mode may
not be usable.
Depending on the recording format, CD-ROM
discs
may not play properly.
Pausing
play
1.
Press and hold the
[~/II/MUTE]
button for 1
second or longer to pause play.
"PAUSE"
appears
in
the display.
2.
To
resume CD play, press and hold the
[~/II/
MUTE] button for 1 second or longer again.
Selecting a
CD
1.
Press the
[E-DISC~]
button to select the
desired disc.
* If a CD is not loaded in a slot of magazine,
pressing the
[~DISC~]
button can not work.
Selecting a track
_Track-up
1.
Press the
[~>]
button to move ahead to the
beginning of the next track.
2.
Each time you press the
[~>]
button, the
track advances ahead to the beginning of the
next track.
_Track-down
1.
Press the
[<~]
button to move back to the
beginning of the current track.
2. Press the
[<~]
button twice to move to the
beginning of the previous track.
20 CMD4
Fast-forward/fast-rewind
• Fast-forward
Press and hold the
[~>]
button for 1 second or
longer.
• Fast-rewind
Press and hold the
[<~]
button for 1 second or
longer.
Scan
play
Scan play locates and plays the first 10 seconds
of each track on a disc automatically. This
function continues
on
the disc until it is cancelled.
*The scan play is useful when you want to select a
desired track.
1.
Press the [SCAN] button.
2.
To
cancel the scan play, press the [SCAN]
button again.
Disc scan
play
Disc scan play locates and plays the first 10
seconds of the first track on each disc
in
the
currently selected CD changer. This function
continues automatically until it is cancelled.
* Disc scan play is useful when you want to select
a desired CD.
1.
Press and hold the [SCAN] button for 1
second or longer.
2.
To
cancel disc scan play, press the [SCAN]
button again.
Repeat
play
Repeat play continuously plays the current
track. This function continues automatically until
it is cancelled.
1.
Press the [REPEAT] button.
2.
To
cancel repeat play, press the [REPEAT]
button again.
Disc repeat
play
After all the tracks on the current disc have
been played, disc repeat play automatically
replays the current disc over from the first track.
This function continues automatically until it is
cancelled.
1.
Press and hold the [REPEAT] button for 1
second or longer.
2.
To
cancel disc repeat play, press the
[REPEAT] button again.
To Next Page
Need help?
General
