To Next PageTo Next PageTo Previous PageTo Previous Page
Why won't my Clarion Car Receiver turn on?
If your Clarion Car Receiver isn't powering on and there's no sound, it could be due to a blown fuse. Replace the fuse with one of the same amperage. If it blows again, it may also be due to incorrect wiring, consult your store of purchase.
What to do if my Clarion Car Receiver sound skips?
If the sound from your Clarion Car Receiver skips or is noisy, the compact disc might be dirty. Clean it gently with a soft cloth. Alternatively, the compact disc could be heavily scratched or warped, in which case you should replace it with a compact disc that is not scratched.
What to do if buttons on my Clarion DB245 Car Receiver don't work?
If nothing happens when you press the buttons and the display on your Clarion Car Receiver isn't accurate, the microprocessor may have malfunctioned. Turn off the power, then press the [RELEASE] button and remove the DCP. Press the reset button for about 2 seconds with a thin rod. Also, the DCP or main unit connectors could be dirty. Wipe them off with a soft cloth moistened with cleaning alcohol.
Why is the sound bad on my Clarion DB245 Car Receiver after turning it on?
If the sound quality of your Clarion Car Receiver is poor immediately after turning it on, especially if you're parked in a humid environment, water droplets might have formed on the internal lens. Let the unit dry for about 1 hour with the power on.
General| Brand | Clarion |
|---|---|
| Model | DB245 |
| Category | Car Receiver |
| Language | English |
Overview of the main unit's controls and their layout.
Detailed explanation of the function for each button on the unit.
Important safety warnings, FCC compliance, and operating precautions.
Instructions for detaching and reattaching the control panel.
Guidance on storing the DCP and important cautions for handling.
Introduction to the remote control unit and how to install batteries.
