CH4
RR Right
CH3
RR Left
Purple/Black
Purple
Green/Black
Green
English
XC2510/XC2410/XC211014
Single amplifier combination system
In this application, the XC2510 is used to drive a full system.
Purple
Yellow/Black
Black
Subwoofer
CH1
FR Left
White/Black
White
Gray/Black
Gray
CH2
FR Right
Gray Black
Purple/Black
Green
Yellow/Black
White
Gray/Black
Bridged #1
Bridged #2
\\
\\
\\
\\
(+)
(+)
(
-
)
(
-
)
Black
(
-
)
(+)
Subwoofer
Each bridged channel of the XC2510 Amplifier can
drive one (1) full-range 4-ohm speaker.
Setting the gain
After completing the installation, follow these steps to set the
gain control and perform the final system checks.
1. Turn the gain control all the way counterclockwise.
2. Turn the ignition switch on.
Bridged Power Output
Refer to the Specifications in Section 8 (Pg.17) of the
manual for additional information on Bridge Mode.
Bridged Mode
In this application, the XC2510 can be wired
for Bridge Mode.
To Next Page
Loading...
Need help?
General
