B. Leakage through
inside or outside of
appliance.
The faucet is not completely connected.
Properly connect the faucet.
The dual float valves elbow union is
defective.
Replace the dual float valves elbow
union.
The dual float valve’s packing is
defective.
Replace the dual float valves packing.
C. Water drips from
dual float valves
assembly.
The cold water piping is defective.
Properly connect and replace the cold
water piping.
User has taken a large draw or series
of draws and reservoir has not yet
refilled. ( Non Spill System only )
Wait until the cold water tank is filled
with water after a large draw due to
inherent restriction of the Non Spill
System.
A. Water flow is
slow from all faucet.
Allow filter to dry. Airflow through the
filter will gradually return to normal as
the filters dries.
B. An excessive
quantity of water
accumulates in the
housing.
The housing is designed to hold a
small amount of water that may seep
through the cap at the bottle neck.
If problem happens on a high
percentage of cooler, there may be a
defect in a cap.
Contact the cap manufacturer.
To Next Page
Loading...
Need help?
General
