Updated on 18 March, 2010
- 10 -
because of inherent conditions.
A. Water drips from
faucet.
The faucet body packing and spring is
defective.
Press down the faucet lever several times.
Replace faucet assembly.
B. Leakage through
inside or outside of
appliance.
The faucet is not completely connected.
Properly connect the faucet.
C. Water drips from
dual float valves
assembly.
The dual float valves elbow union is
defective.
Replace the dual float valves elbow union.
The dual float valve’s packing is defective.
Replace the dual float valves packing.
The cold water piping is defective.
Properly connect and replace the cold
water piping.
8. WIRING DIAGRAM