PRODUCT FEATURES
OPERATION
• Two-Way Radio
with up to a 3 km (2 mile) range
•
8 Channels*
•
38 CTCSS Privacy Codes
• 83 DCS Codes
• Backlit LCD Display
•
Water Resistant
• Battery Saver Circuitry
•
Maximum Range Extender
•
VOX Mode for Hands-Free Transmissions
•
VibrAlert
®
Silent Paging
•
Intercom Capability
•
10 Memory Locations
• Call Alert (10 Selectable Tones)
•
Scan (Channel, CTCSS Privacy Code, DCS
Code, Memory)
•
Dual Watch Programmable 2-Location
Scan
•
Key Lock
• Auto Squelch
• Selectable On/Off "Roger Beep"
Confirmation Tone
• Selectable On/Off
Keystroke Tones
• External Speaker/Microphone
Jack
•
Belt Clip
• Wrist Strap
• Battery Charge Contacts in Battery
Compartment Door
•
Rapid Desktop Charger with AC
Adapter
(240V, 3-Pin UK Plug)
•
Rechargeable NiMH Battery
Pack
*You are not allowed to use channels 1 and 2 in
France.
This situation can change; please contact the
French radio licensing authority for more
information.
English
Product Information
This microTALK
®
radio has been manufactured to meet all required standards for radio
equipment using PMR 446 frequencies as authorized. The use of this two-way radio
product involves the public airways and its use may be subject to local laws or regulations.
Contact your radio licensing authority for more information.
Caring for Your Radio
Your microTALK
®
radio will give you years of trouble-free service if cared for properly. Here
are a few suggestions:
• Handle the radio gently.
• Keep it away from dust.
• Never put the radio in water or in a damp place.
• Avoid exposure to extreme temperatures.
Battery Installation
To Install or Replace Batteries:
1. Remove belt clip by releasing belt clip latch and
sliding clip Up.
2. Pull down on the BATTERY DOOR LOCK TAB to
remove the battery compartment cover.
3. Insert the rechargeable NiMH battery pack (part
No. FA-BP) according to instructions indicated on battery pack.
4. Replace battery compartment cover and belt clip.
NOTE: Your microTALK
®
radio can also be operated with four standard
AAA alkaline batteries. Always use high-quality alkaline batteries.
Position batteries according to polarity markings.
Remove Belt Clip Lock Tab
Insert Batteries
Product Features
To Next Page
Loading...
Need help?
General
