Cobra MicroTalk User Manual

Select any of the 14 channels by pushing the
channel up or down buttons.
Select Main Channel (1-14)
Turn on the microTALK 2-Way Radio.
Operation
5
Select
Channel
Note
Units must be on same
channel and subcode to
communicate.
Note
Channels 8-12 generally
are less used and give bet-
ter results for communica-
tions in most areas.
Note
Push and hold the channel
button for fast channel
advance.
2
1
Note
Selecting a CTCSS
subcode will allow you to
only hear conversations on
that selection. For
example,you may be with
a group of friends. If all of
you select channel 7 and
subcode 1, you will hear
your friends but will not
hear anybody else on
channel 7,subcodes 2
through 38.
Select CTCSS Subcode (00-38)
Press the mode butto n .After a short delay,s m a l l
n u m bers will flash next to the channel display
LCD indicating the subc h a n n e l .
Select CTCSS
Subcode
1
Select subcode number by moving the chan-
nel button up or down.
When the desired code is displayed push the
mode button and release.An audible tone will
confirm your selection.
2
3
FRS_225 3/2/01 3:23 PM Page 5

Cobra MicroTalk Specifications

General

Brand	Cobra
Model	MicroTalk
Category	Two-Way Radio
Language	English