Muting an Alert
Your detector allows you to quickly turn Off an audio Alert by momentarily pressing
the Mute button. If you press the Mute button a second time during
the Alert, the audio Alert will be turned back On.
Auto Mute Mode
Auto Mute will automatically reduce the audio volume of all alerts after four
seconds for as long as the signal is detected. The factory setting for Auto Mute
is On.
Settings
•
When changing the Settings on your detector, please keep in mind:
n Each time the unit is turned On the factory settings of Highway and
Auto Mute-On will be set. They can be changed while the unit is in use
as described in the following sections.
Highway/City Mode
Setting your detector to City mode delays all X band audio alerts at lower
signal strength levels. (A single beep will sound when the signal is rst
detected.) This will reduce false alerts while you are driving in, or near,
urban areas where there are many sources for conicting X band signals
such as microwave towers and automatic door openers.
To change settings, follow the procedure listed below, which indicates what you will
see and hear as you complete each step. The factory setting is Highway mode.
City Mode
Highway Mode
To Change From Highway Mode To City Mode
Press and release
the City button.
Audio Visual Display
One beep C LED Lights
To Turn Auto Mute Off
Press and release
the Mute button
while no alert
is occurring.
Audio Visual Display
One beep Audio Only
To Change From City Mode To Highway Mode
Press and release
the City button
again.
Audio Visual Display
Two beeps Audio Only
To Turn Auto Mute On
Press and release
the Mute button
again while no
alert is occurring.
Audio Visual Display
Two beeps Audio Only
To Next Page
Loading...
Need help?
General
