Do you have a question about the Coleman Outdoorsman 9280-108 and is the answer not in the manual?
Insert the first section of each leg pole into the curved frame poles.
Connect the ridge pole section to the frame assembly.
Extend each leg fully by connecting the shock-corded poles.
Unfold tent, position it, and attach poles to corners using pin & ring system.
Stake down tent corners by inserting stakes through the rings of the pin & ring system.
Attach tent to the frame using the frame clips at the top rear and sides.
Attach remaining ridge frame clips to the ridge pole from the open door.
Drape rainfly over tent frame and insert frame poles into reinforced pockets.
Attach rainfly to frame poles with ties and guy lines to corners and sides.












Loading...