To Install or Replace Batteries
Yournewpumpoperateson4“D”cellbatteries.
Forlongestlife,usealkalinebatteries.
1.Makesurethepumpis
off,thenturnonitsside
withtheBatteryCover
(A)facingup.(Fig.6)
2.Release/removethe
BatteryCover(A)by
liftingupontheLatch
(B).(Fig.6)
3.Install4batteriesin
thecorrectorientation
asshown.Alwaysbe
surethebatteriesare
installedcorrectly.(Fig.
7)
Note: Motormaybe
hot.Usecautionwhen
replacingthebatteries.
4.ReplacetheBattery
Cover(A)andsecure
theLatch(B).Lineup
“Tabs”(C)onBattery
Cover(A)withthe
“Slots”(D)onthebattery
compartment.(Fig.8)
Inserttabsintoslots,
pressdownonlatchendofthebattercover,
closelatch.
4010045469 (ECN20060957-02)
Inflation and Deflation
•To begin inflation, open external cap
and pull firmly on the lanyard to extend
out. This will open internal yellow seal.
(Fig.1)
•Attach adapter nozzle to inflation end of pump.
Insertpumpandturnon.(Fig.2)
•When fully inflated, seal valve by pushing in with
pump nozzle. This will seal the internal yellow
stopper and keep air from escaping while closing
cap.(Fig.3)
•Fully remove pump and close external cap. Valve
shouldappeardepressedintoitself.(Fig.4)
•Remove adapter nozzle from inflation end and
attachtodeflationsideofpump.Repeatsamesteps
asinflation.Thiswilldrawtheairoutquickly.(Fig.5)
Other Valves
Workswithstandardwideopeningandboston
stylevalves.
Note: For optimum performance,
alkaline batteries are recommended.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
-
-
Fig. 6
Fig. 7
Fig. 8
A
B
C
D
Please call or write us with any comments or questions:
Coleman Brands Pty. Ltd.
Unit 5-6, 13 Lord Street,
Botany NSW 2019
Australia
Telephone: 1800 224 350
Email: customerservice@colemanaust.com.au
www.colemanaustralia.com.au
Made in China
© 2017 The Coleman Company, Inc. All right reserved.
Coleman
®
, , and are registered trademarksand
QuickPump™, Double Lock™, QuickBed™ and Wrap ‘N’ Roll™ are
trademarks of The Coleman Company, Inc.