Coleman QUICKPUMP How To Use And Enjoy

4010019276 (ECN20022277-01)
How to Use and Enjoy Your Coleman
®
Water Resistant
Rechargeable Pump
Inflating Standard Pinch Valve
• Attach pinch valve adapter to inflation
end of pump.
• Insert pinch valve adapter into pinch valve.
• Make sure tip of adapter is extended
past inner “Flap” inside of valve.
Turn pump on.
• When fully inflated, remove pump from
valve and seal valve.
Other Valves
This pump is compatible with most valves on inatable products. If you
have an inatable product with a valve other than those described above,
rotate the adapter sleeve until nozzle end ts valve.
1. Remove adapter nozzle from
ination end and attach to
deation side of pump. Repeat
same steps as ination. This will
draw the air out quickly.
Deflation
Please call or write to us at our nearest location with any comments or questions.
TheColemanCompany,Inc.•3600NorthHydraulic•Wichita,Kansas67219U.S.A.
1-800-835-3278intheUnitedStates•www.coleman.com
SunbeamCorporation(Canada)Limited•DBAJardenConsumerSolutions
20BHerefordStreet•Brampton,ONL6Y0M1
1-800-387-6161inCanada•www.coleman.com
© 2012 The Coleman Company, Inc. All rights reserved.
Coleman
®
, , and are registered trademarks and
QuickPump™ and Double Lock™ are trademarks of
The Coleman Company, Inc.

Coleman QUICKPUMP Specifications

General

Product color	Red
Pump pressure	- bar
Input voltage	120 V
Power source type	AC
Number of valve adapters	2