INSTRUCTIONS FOR TECHNICAL PERSONNEL
46
WIRING DIAGRAM
A1 Main switch
A5 Drain switch (if required)
B1 Pilot lamp power on
B2 Pilot lamp machine ready
B3 Pilot lamp machine working
B5 Pilot lamp drain cycle (if required)
C1 Wash pump contactor
C2 Booster heater contactor
C2bis Safety contactor of booster heater
C3 Tank heater contactor
C4 Relay
D1 Wash timer
D2 Wash timer
E1 Hot rinse solenoid valve
F1 Door switch
G1 Condensator
G2 Anti noise filter
H1 Junction
H2 Junction for Detergent dispenser (if required)
M1 Wash pump
M2 Rinse booster pump (if required)
M3 Detergent dispenser (if required)
M5 Drain pump (if required)
P1 Pressure switch
R2 Booster heater
R3 Tank heater
T2 Booster thermostat
T2bis Booster safety thermostat
T3 Tank thermostat
The manufacturer declines any responsibility for any printing errors contained
in this booklet. The manufacturer also reserves the right to make any
modifications to its products that do not affect the basic characteristics thereof.
To Next Page
Loading...
Need help?
General
