Maintenance
To ensure superior performance, the quartz sleeve
should be cleaned periodically.
Cleaning the quartz sleeve
➀ Disconnect UV Sterilizer from
outlet, turn off the pump and let
water drain from Turbo-Twist.
➁ Unscrew locking ring screw
and slide tab down to release.
(Picture 1)
➂ Carefully twist the quartz
housing and the main body
opposite of each other.
(Picture 1)
(PICTURE 1)
QUARTZ SLEEVE
QUARTZ
HOUSING
MAIN BODY
➅ Once clean, reinstall the quartz sleeve
into the main body.
➆ Reinstall locking ring and tighten screw.
➄ Wipe the quartz sleeve using a soft,
damp cloth. Do not use household
cleaners or abrasive scrubbers to
clean the quartz housing.
➃ Slide the quartz sleeve out of the
main body. (Picture 2)
(PICTURE 2)
C A U T I O N
• Never look directly at the unshielded lamp as ultraviolet
radiation is harmful.
• Disconnect the UV Sterilizer from the power supply when
installing or performing maintenance.
• Never submerse the UV Sterilizer in water.
6
To Next Page
Loading...
Need help?
General
