1. Close the tap water supply valve, then use the drain hose to completely drain all water from
inside the water purier. When drainage is complete, unplug the power.
∗
Use the drain hose and cold/room-temperature water dispensing faucet to completely drain all water from inside the water purier.
∗ Drain water in the cold/room-temperature water tanks through the cold/room-temperature water faucets and water in
the hot water tank (CHP-6310L) through the side drain.
2. Push the top cover of the purier upward to open.
Open the 6 clips axing the interior storage tank and then open the internal water tank cover.
3. Detach the antibacterial lter from the water tank cover and shake in puried water to
clean, then reinstall. Replace with a new part every 12 months.
▶
▶
▶
▶
▶ ▶
▶ ▶
2
1
2
1
HOW TO CLEAN
How to Clean Internal Water Tank