B. Accessories (in one separate box)
See Fig.2
A. Feed handles I I I _/_
B. Crank handle
C. Hex wrenches
D. Hex bolts
E. Chuck key
F. 5/8=inch Chuck and A B
chuck removal tool
G Table fence set
C
E
D F
Table Fence
Use the supplied hardware to attach the fence to the table as shown in the picture below.
Use the fence to align the workpiece and provide a backstop for secure drilling.
NOTE: Table pictured is different shape than equipped with product. Fence attaches through
slots in the same manner.
G
Q
Wingnuts
To Next Page
Loading...
Need help?
General
