Need help?Do you have a question about the Craftsman 315.17280 and is the answer not in the manual?
Explains the concept of double insulation in power tools for user safety.
Instructions for inserting and securing saw blades, including notes on universal shanks and flush cutting.
Step-by-step instructions for removing and replacing worn brushes in the tool.
Detailed procedure for removing and installing a new switch, including wiring.
Instructions for replacing the power supply cord, including bend relief transfer.
Guidance on selecting appropriate blades and speed settings for optimal performance with different materials.
Explains the concept of double insulation in power tools for user safety.
Instructions for inserting and securing saw blades, including notes on universal shanks and flush cutting.
Step-by-step instructions for removing and replacing worn brushes in the tool.
Detailed procedure for removing and installing a new switch, including wiring.
Instructions for replacing the power supply cord, including bend relief transfer.
Guidance on selecting appropriate blades and speed settings for optimal performance with different materials.
General| Model Number | 315.17280 |
|---|---|
| Type | Circular Saw |
| Blade Diameter | 7-1/4 inches |
| No Load Speed | 5000 RPM |
| Arbor Size | 5/8 inch |
| Cord Length | 6 feet |
| Bevel Capacity | 45 degrees |
| Motor Amps | 13.0 Amps |
| Depth of Cut at 90 degrees | 2-3/8 inches |
| Depth of Cut at 45 degrees | 1-3/4 inches |
To Next Page