11
OPERATION
Meets ANSI Safety Standards
Craftsman Tractors conform to the safety standard of the American National Standards Institute (ANSI).
NOTE: Any reference in this manual to the RIGHT or LEFT side of the tractor is observed from operator’s seat position facing forward
towards the front of tractor.
A Parking Brake Lever
B Throttle/Choke Control Lever
C Ignition Switch Module
D Auto-drive Pedal
E Deck Lift Lever
F PTO Lever (Blade Engage)
G Cup Holder
H Shift Lever
I Seat Adjustment Lever
J Brake Pedal
Figure 6