Creality CR-10 V3 User Manual

Trouble-shooting
End
TF card
F ile n ame
Sl i ce
limit
sw i tch
hot bed
Thermistor
Heat pipe
Thermistor
Slice/
T im ing
belt
Coupl in g
Other
Filament
E stepper
1, Erase t he TF card
2, Format the TF card
3, Replace the TF card
1. Rename the file wi th alphabet and
numbers
1. Move the model a nd rcst.'.lrt the slicing
>----- 2, Restore the model with software
1. Reconnect the cables
2, Check via the replacement method
1. Reconnect the
cables
2, Check vi a the replace m ent method
1. Reconnect the
cables
1. Reconnect the cables
L Reconnect the cables
1. Reconnect the cables
1, Restart the slicing
2, Adjust the tension of the syn chro nous
belt
I, Fasten t he coupling
I, Cl ea n t he f i lament
2, Replace f i lament
l, Reconnect the cables
2, Check via. the replacement method
Resolved
daused l
contact for
roplacnent
The fault
cannot be
identified,
r:ont1u:t to
reso lve d
18

Creality CR-10 V3 Specifications

General

Brand	Creality
Model	CR-10 V3
Category	3D Printers
Language	English