Crestron AV3 & PRO3 3-Series Control Systems
Operations Guide – DOC. 7330C 3-Series Control Systems: AV3 & PRO3
5
Specifications
Specifications for the AV3 and PRO3 are listed in the following table.
AV3 & PRO3 Specifications
SPECIFICATION DETAILS
Control Engine Core 3 OS; real-time, preemptive
multithreaded/multitasking kernel;
Transaction-Safe Extended FAT file
system; supports up to 10 simultaneously
running programs
Memory
SDRAM 1 GB
Flash 4 GB
Memory Card Expandable storage up to 32 GB (SD™
memory card not included)
External Storage Up to 1 TB using USB mass storage device
(not included)
Communications
Ethernet 10/100/1000 Mbps; auto-switching;
auto-negotiating; auto-discovery; full/half
duplex; industry standard TCP/IP stack;
UDP/IP; CIP; DHCP; SSL; IEEE 802.1X;
SNMP; BACnet/IP; IPv4 or IPv6; Active
Directory authentication; IIS v.6.0
WebServer; SMTP e-mail client; installer
setup via Crestron Toolbox or Microsoft
Internet Explorer; supports all e-Control,
Core 3 UI XPanel, Crestron Mobile, and
Crestron Fusion™ and RoomView
®
applications
Control Subnet 10/100/1000 Mbps Ethernet, auto-switching,
auto-negotiating, auto-discovery, full/half
duplex, DHCP server, DNS server, port
forwarding, Isolation mode
Cresnet
Cresnet Master mode
RS-232/422/485 For 2-way device control and monitoring, all
ports support RS-232 up to 115.2 kBd with
software handshaking, two ports also
support hardware handshaking, RS-422,
and RS-485
IR/Serial Supports 1-way device control via infrared
up to 1.2 MHz or serial TTL/RS-232 (0-5
volts) up to 115.2 kBd
Power Requirements
Main Power 2.4 amps @ 100–240 volts ac, 50/60 Hz
Available Cresnet Power 75 watts (3.125 amps @ 24 volts dc)
Net ID 02
(Continued on following page)
To Next Page
Loading...
Need help?
General
